• Mc Hot Software Tangle 1.1.2 For Mac Download
• Mc Hot Software Tangle 1.1.2 For Mac
• Mc Hot Software Tangle 1.1.2 For Mac Pc

Jan 2, 2018 - Figure 1.1.2 An interaction contrast of temporal distance (trials containing. Hb dHb tHb HbD. Visualization and software demonstration. Tangle lexical and prosodic information. In principle heat the tissue. Fining the separation between mac. In the open source software development, programmers frequently refer to source. File to build xfce-mcs-manager plugins This package includes the header files you will. Izumi.momonga-linux.org gnopernicus-1.1.2-2m.mo4.nosrc.rpm castor. GUIs (GTK+, Motif/LessTif, MS Windows, Mac) from the same source code. Paragon NTFS Crack Mac OS X Plus Serial Number+Keygen Paragon NTFS Crack is fully compatible with Apple’s new security policy DVDFab 11.0.1.4 Crack January 9, 2019 – by madni 0.

With the Mag Loan, you can borrow up to 150,000 with a good interest rate and 30,000 without showing payrolls. The money will be available on your account within 1-2 business days. If you’re missing money for one or the other, you can quickly and efficiently take a loan – big and small. The does not ask you what you need to spend the money on. You can use them on a vacation as well as a new kitchen or something completely third. They are not going to point your fingers no matter what.

By using the Mag Loan, it is not necessary for you to go to a physical bank and ask for a loan. Instead, you can sit at home behind the screen and apply while you are completely anonymous to the public. It takes only a few minutes to fill out the application form and after you have sent it, you will receive a response within minutes to decide whether or not to borrow the required amount.

If you have approved your loan, you must subsequently sign in and approve with NemID. Then there is no time before you stand and have the money available. Your benefits with a loan from the Mag Loan When you choose to make a loan through the Mag Loan, you will find that they have a lot of benefits. We have collected the best here: Fast answer. You will receive a quick response to your loan application – within minutes, you will know if your loan has been approved or not. Quick payment. Once your loan has been approved, it will take no more than 1-2 business days before you get the money in your custody and at your disposal.

If you apply early in the day, you can even get them paid the same day. Low-interest rate. You are guaranteed a low and competitive interest rate. The interest rate is calculated based on your credit rating, so you can look forward to a fair rate that caters for you and your options. Great peace of mind. You can feel completely confident when you take a loan from the Mag Loan. They treat your information with the greatest confidentiality and security so your personal information never comes in the wrong hands.

The way you can be sure of this is that you must always log in and approve your loan with your NemID, which is just 100% safe. A wide range of possibilities. The Mag Loan gives you a wide range of loan options, as you can borrow everything between $ 5,000 and $ 150,000. If you borrow below $ 30,000, you do not even have to show payslips. You can, therefore, customize the amount to fit your needs and money. There is no question asked when you take a loan, so it’s up to you what you want to spend the borrowed money on.

Nor do you have to make any collateral when you make the loan. Should you cancel your loan, there is no firm commitment and you have 14 days of cancellation on the credit agreement. The 14 days begin to count when you have received the money. Great transparency. There are no unforeseen surprises when you take a loan at SmartLink.

Already in the completion phase, you will know how much the fixed monthly benefit is, and you are therefore fully aware of the expenses you incur in connection with the loan. You decide on how long the repayment period should be when you make a loan.

You can choose anything within 12 to 72 months, which you enter easily and quickly when you fill out the loan form. The repayment period is therefore adapted to you and your current economy. With Mag Loans, there are many advantages: Who can get a loan at Mag Loans It is not everyone who can take a loan at the Mag Loan. Simple requirements that you must meet before you can apply. You must be 25 years old. You must have a permanent residence in Denmark. You must not be registered in RKI.

You must have a fixed income of at least DKK 120,000 per year. If you meet all four requirements, you can immediately apply for the loan. However, you must be aware that even if you meet all the requirements, not everyone is approved for the loan because an individual credit rating is made. When you borrow, it is not necessary to provide security.

Take control of the budget Before you choose to make a loan, it’s a good idea to fully control the budget and the economy. The bigger a loan you take, the more expensive it will be for you in the end. Therefore, there is no need to borrow more money than you actually stand and need.

The interest rate on your loan depends entirely on your individual credit rating and loan application, but the interest rate is typically between 7.22% and 21.93% (variable debt rate). One step closer to the dream Whatever you stand and dream about, you will come one step closer to this when you choose to make a loan. If you want to increase the chances of being eligible for your loan, they recommend that you choose to take the loan with a co-applicant. It could typically be a cohabitant or spouse – you must have the same address register. The Mag Loan collaborates with us which is why they are also referred to after your loan has been approved. We are a trusted and recognized player in the market and you can, therefore, expect a professional process and treatment.

Internal geotagging for Canon and route the photo tour record. Both make the new Geotagger Canon possible. In the first part presentation and short test. Canon Geotagger GP-E2 (Photo: Canon) Canon enters the market for accessory geotaggers with the GP-E2.

Until now, an expensive WLAN transmitter was required for internal geotagging with EOS cameras. At this a GPS receiver was connected. Now, modern EOS SLR cameras do not require a cable to connect the camera to the GPS. In addition to the pure coordinates for the photos, the GP-E2 also offers some additional features.

In the first part about geotagging SLR cameras I introduce you to the Geotagger GP-E2 in more detail. When first unpacking, the first thing you notice is the size (5.4 x 7.3 x 4.4 cm). Ready for operation with an eneloop AA battery, the Geotagger weighs 110 grams. Is thus not a lightweight but on a neat SLR camera with lens still OK.

Delivery Delivery Canon GP-E2. Geotagger GP-E2. Nylon bag. Fabric transport bag. Two different length cables for connecting GPS with camera. Manual and short instructions.

CD with Map Utility Software USB port for reading the logger A cable to connect the Geotagger directly to the computer is unfortunately not included. For this, the cable from the scope of supply of the camera must be used. Alternatively, every standard mini-USB cable works.

Which cameras fits the GP-E2? Canon EOS 7D and GP-E2 The “oldest” EOS camera which supports the Geotagger with restrictions. As of firmware version 2, the EOS 7D works together with the GPS module. At least partially. With the compass data, the camera can do nothing and ignores the viewing direction.

Mechanically, the Geotagger can be mounted on the hot shoe. Nevertheless, the USB connection cable is always needed. Time sync and geotagging videos also does not work. Canon EOS 5D Mark III with GP-E2 Canon EOS 5D Mark III and GP-E2 Here, the Geotagger plays its full power for the first time. All geotagging functions are supported as of firmware version 1.1.2.

Communication takes place directly via the hot shoe. A USB cable is only necessary if the logger is to be mounted offside, such as during lightning. Canon EOS 1DX and GP-E2 Canon’s top model supports all geotagger features. I am not aware of firmware limitations. Again, no USB cable is needed. Canon EOS M and GP-E2 The mirrorless system camera can also be combined with the Geotagger.

Canon EOS 6D and GP-E2 GPS selection on the EOS 6D Despite the fact that the EOS 6D already has a GPS chip built in, even with the small full-frame model, it is possible to connect the external GPS receiver – without a cable. In the menu can then be selected from where the geodata should come. Canon EOS 650D and GP-E2 On the German website the GP-E2 is not listed as an accessory. The US sister model EOS Rebel T4i GPS is listed as an accessory. According to the test report by Didi on Tour works on a 650D with firmware 1.0.1 geotagging including direction information. Functions – Or – What can I do with the GP-E2?

Enrich photos with coordinates The GP-E2 sends the received coordinates to the camera. This integrates the position directly into the Exif data. Whether in JPG or CR2 (RAW) is photographed. Geotagged videos Just as with photos, the position is incorporated into the video file. And the position at the start of the recording.

Track the photo tour record The GP-E2 has built-in memory to record the distance covered. And this works by the own battery also independent of the camera. Camera clock with the exact sync The GPS satellites send high-precision time information.

These can be used to set the exact time in the camera. First test: The GP-E2 as Geologger For the first tests so insert the battery, switch to LOG and go. Even after half an hour driving in the car in the, the GPS LED is still flashing fast. This indicates, according to manual on missing GPS reception. Later on the computer while reading the track, the route is complete except for the first few hundred meters. In order to be able to use the GPS receiver protected even without a camera Canon delivers a fitting nylon pouch.

This bag has a window for the switch and a flap in front of the USB port. The GP-E2 sits nicely taut in the bag. On the back of a loop for the belt is sewn. Another word about the battery life. In pure logger operation, the GP-E2 with an eneloop has held at intervals of about 15 to 5 hours at recording intervals of 15 seconds or 5 seconds. Interim conclusion Canon GP-E2 Canon GP-E2 in functional bag If the size and the price does not bother you, the Canon GP-E2 gives you an excellent geotagger for your Canon SLR camera. The workmanship and the feel is top.

The fastening on the hot shoe also has an extremely high quality, with the rubber seal and the lock. Due to its own power supply via Mignon battery, the Geotagger does not load the camera battery and track recording is also possible without a camera. I have to take a closer look at the topic with its illogically flashing LEDs. More about using a Canon EOS 5D Mark III in the field test in the second part about geotagging with Canon EOS cameras.

Use the free BT747 software to read out and configure the GPS logger. And this on both Windows and Mac computers.

In my previous GPS logger practice tests is always noticed one thing: Often there are problems with the included software. In this article I would like to introduce a reliable alternative program. For most Geotagger who use the GPS chipset from MTK, the open-source software BT747 can be used. Written is the tool in Java and thus platform independent. Features of the BT747 control program The tool for GPS devices can essentially do two things, reading the memory and settings on the logger.

In addition, converting tracks to other data formats, updating GPS assist data (A-GPS) and geotagging data. Prerequisite is a MTK chipset in Geologger. More specifically, it knows the detailed list of compatible loggers. Even I have successfully used BT747 with the GPS loggers i-Blue 747A + and Holux M-241. Installation of BT747 BT747 installation BT747 is available for free download. In addition to a desktop variants, BT747 is also available for mobile devices.

Among other things, for (the old) Windows Mobile and J2ME phones. The easiest way to install is with Windows. Just download and run the desktop version for easy installation. On the Mac, it gets a little bit more complicated because the installer lacks rights to create a directory. The mean thing is that no error message comes.

Before the installation is started so first start the terminal and enter the following two commands one after the other. The administrator password is required. Sudo mkdir / var / lock sudo chmod 777 / var / lock The first command creates the folder, the second makes it readable and writable. Then load and start the installer as with Windows.

Connect logger If the logger is to be connected via Bluetooth, the Blutooth connection must first be established in the operating system. Then look for the used COM port. For Windows, this is done via ” Control Panel – Change Bluetooth Settings – COM Ports “. For Mac simply select “Bluetooth (Mac)” in the For a USB connection, the drivers must first be installed. The ” Connect ” button at the bottom connects the BT747 to the GPS-Logger. Download the GPS tracks On the “Log Actions” screen, information about the connected logger is displayed on the right. Interesting here is the current memory usage.

BT747 control program The download of tracks runs from top to bottom. In the files box, the file paths for the raw data and the converted tracks are created first. Continue to download the raw file with the “Download” button. Finally, convert the track on the computer into the desired geodata format. For example, to convert to GPX universal format just press the “GPX” button.

Then you have the data in the most universal format such as geotagging with GeoSetter or Lightroom on the computer. Delete old tracks Delete GPS logger After the tracks are on the computer and checked if everything fits, the logger can be prepared for the next tour. To do this, switch to the tab “Device settings” and release the memory from the logger with “Delete only”. Configure GPS Logger For device settings, two digits are particularly important. BT747 control program device settings One is the ” Position” area on the left.

Here you can set which data will be saved. Most important effect: Number of records to be saved. Very nice with the BT747 application is that immediately the estimated number of records is displayed.

Longitude and latitude are mandatory here. Still activate altitude. Thus, the available data storage is optimally utilized for geotagging. On the other hand ” Log of ” bottom right. There, the log distance is adapted to personal needs. Fix should stay at 1 second (1000 ms). For geotagging, a time interval of 5 seconds has proven to be a good compromise between accuracy and memory requirements.

Update A-GPS BT747 control program AGPS The AGPS Screen is Using AGPS data to save the logger, the file is first downloaded from the Internet and then transferred to the logger. The data is then valid for one week.

With current AGPS data, the time until the GPS fix is ​​significantly reduced. Conclusion Big advantages are the platform independence and the huge range of functions. Beginners may find it difficult to do so with the full and un-intuitive interface.

Due to the many professional setting options, there is also the risk of making unfavorable settings on the logger. Under Windows, BT747 is my favorite tool to read and set GPS-Logger. MyTracks for iPhone is the perfect complement to geotagging software on the Mac. Record GPS tracks and on the move. MyTracks for iPhone The digital camera does not have a GPS receiver installed, the desktop has a Mac and an iPhone is also available? Best conditions for track-based geotagging with myTracks.

MyTracks – The GPS Logger for iPhone is the perfect complement to the recently introduced Mac software myTracks4Mac. Click here for the myTracks4Mac software presentation. The iOS app records tours and wirelessly passes them home to the Mac. Record track with the iPhone On the start page with ” GPS track recording start ” the tracking abut. Then the view changes to the map. There, the recording accuracy can be adjusted.

A click on the REC button leads to ” Change accuracy “. From my experience, I can recommend the combination of ” good ” and ” 5s ” as a decent compromise between track accuracy and battery life.

Here is a comparison of two settings. Comparison of recording accuracy iPhone photos on the map The internal camera can also be started from the map page. These recordings are then displayed directly on the track. On maps are various OpenStreetMap flavors and NASA BlueMarble ready. Practical for recordings without an Internet connection is the possibility to preload map areas in advance on the iPhone. So you do not have to do without the track representation on the map, even in the wilderness. When track recording ends, myTracks creates a file at the time of recording in the track list.

Those who are afraid of forgetting to can start a short-term recording. At the end of the set time, the recording ends automatically. An empty rechargeable battery due to continuous recording is thereby prevented. In the background, the recording continues smoothly.

The user is constantly informed about the current number of waypoints on the app icon. Passing to the Mac Transferring recordings to the Mac At home, the recordings are synchronized directly with myTracks on the Apple computer. To do this, iPhone and Mac must be in the same (Wi-Fi) network.

A transfer via cable and iTunes is not possible. It is important that on the iPhone the synchronization service is active and a password is entered.

Via the menu item File – Synchronize with iOS Device the Sync-Dialog starts. Select the appropriate iPhone in the list, load tracks from the iOS device as an action, enter a password and start syncing. Track management on the Mac Then the tracks recorded with the iPhone are included in the track database of myTracks and can be used for track-based geotagging.

Export the tracks Export the GPX track If you want to use the recorded tracks with tools other than myTracks on the Mac, you can also trigger an export of the GPX files. Open the context menu from the track list. At the bottom you can have the track sent by e-mail. Upload to the Dropbox Via ” Open track in “, the transfer to a navigation app or my preferred export to the Dropbox works. It should be noted that the track name for the Dropbox is changed.

The myTracks standard contains invalid characters. What I did not find is the ability to export multiple tracks at the same time. Personal conclusion The program worked reliably in the test and without crashes. The interface can be operated intuitively with the following two exceptions. Bookmarks are too present for me and the track and map settings are hidden away. The recording quality of the tracks is good.

Everyone who works on the Mac with the geotagging software myTracks and want to record the tracks with the iPhone or iPad instead of using a GPS logger will find “myTracks for iPhone” an excellent GPS logger app. With the export option, myTracks for iPhone is the recommendation for GPS recording on the iOS device. Download QR code myTracks – The GPS Logger Developer: Dirk Stichling Price: Free + Download QR code myTracks Developer: Dirk Stichling Price: 19,99 € Posted on. The GPS receiver is supposed to plug directly into the Nikon camera?

Which model fits better? A direct comparison of the Dawntech ECO Pro-F with the AK-G1s from Aokatec. For photographers who want to attach the GPS receiver directly to the Nikon DSLR camera, there are currently two models.

By comparison, the AK-G1s from Aokatec, the two ECO Pro-Fs from Dawntech. All are designed for the professional line of Nikon SLR cameras.

Revised di-gps ECO ProF-M Update October 2013 The improved Dawntech ECO has been added to the comparison. What are the strengths and weaknesses of the Geotagger and which is the better choice? Comparison of the data Manufacturer AOKATEC Dawntech Dawntech model AK-G1s ECO Pro-F ECO ProF-M Technical specifications GPS chipset? MTK MT3339 MTK MT3339 power consumption 60mA 17 mA to 19 mA 17 mA to 19 mA attachment Screwlock painter Screwlock and suspension lines size 24mm x 33mm x 13mm 40mm x 25mm x 22mm 40mm x 25mm x 22mm mass 13 grams 14 grams 18 grams featured Coordinate + height compass Track logger Remote-control terminal GPS cache. price about 60 euros about 160 euros about 170 euros Review field test field test field test Strengths and weaknesses of GPS receivers The has the better case. It is more compact and is closer to the camera. In addition, it is secured against falling out with a metal screw.

The Dawntech of the first generation turns out too easy and stands out, which can lead to damage. In the second version the knurled screw was added. The Dawntech V1 is missing a switch to permanently power the GPS receiver. So frequent, long-lasting restarts of the GPS receiver are necessary.

After the update, the software was improved so that a switch is no longer missing. A remote release fits all geotaggers. Advantage of the Dawntech models: The well-known 10-pin accessory socket can still be used. The AK-G1s requires a remote release with a 2.5 mm jack plug.

The GPS reception quality of the Dawntech is clearly ahead. A GPS fix is ​​made quickly and the positional accuracy is top. The best way to look at the details of both geo-excavators is in the extensive field tests: Aoka AK-G1s, di-GPS ECO Pro-F and the new ECO ProF-M. In terms of price, the Aokatec is in the lead. For more than twice as expensive Dawntech offers a German dealer with warranty and good support. Which Geotagger to buy?

Aokatec or Dawntech – everyone has their advantages Each of the loggers has its advantages and disadvantages. Therefore, I do in this case with a clear recommendation very difficult. The best would be a combination of both. Housing from Aokatec and electronics from Dawntech. Update October 2013 After the Dawntech update my recommendation goes to the new ECO ProF-M. Only the further protruding housing remains as a small point of criticism.

Geotagging without cable. Only a small Bluetooth receiver on the camera and a GPS receiver in the backpack. Geotagging in its most carefree form. Already at the photokina in 2008 I was able to examine the prototype of the Unleashed geotagger. In comparison to the then still current adapter cable a great solution for internal Geotagging.

The signals from a Bluetooth GPS receiver reach the suitable Nikon and Fuji cameras wirelessly and are integrated directly in the camera into the Exif data. Now I have a test device and the opportunity to put the system through its paces and send it to the standard round of geotagging systems. The full name of the Geotaggers manufactured by the German company foolography is Unleashed D200 +. This model is compatible with Nikon cameras with the 10-pin accessory connector. Attention, with the Nikon D800, D800E and D810, the model presented here no longer fits.

One corner of the housing is to be modified. There is also a ready to buy “Unleashed D800” model. First impression and functionality Unleashed packaging The first thing that came to mind when I opened the package was “Will you be my geotagger?” Finally, the small module will be delivered in a noble black jewelery box. The replica of the Unleashed from Far East (AK-4N) I had already tested. Therefore here again and again one or the other indications of the differences between the two devices. The smaller size of the Unleashed, unlike the AK-4N, is superb. What make up a few millimeters here.

You can easily get to all buttons and switches. In normal operation, you do not realize at all that an additional module is plugged in. The original Unleashed also has an indoor lock function. This means that the last determined position max. 30 minutes is saved.

Thus, even images in buildings can at least reasonably be provided with geodata from the entrance. Helps very well with short GPS interruptions in street canyons or in dense forests. With replica and original the remote release socket is the same. Matching all shutter release with 2.5 mm jack. Existing 10-pin connector systems will not work with geotagging at the same time.

An LED installed in the Unleashed informs about the current status. And there are some of them.

More detailed inform here the neatly made manual which is offered in German and English. The power consumption is extremely low. I did not notice any change in battery life during the tests.

Everything moved in the context that I’m used to from the D300. A camera-side problem also occurs here, as soon as you trigger the camera directly from hibernation for a snapshot. Then the camera has not made any connection and the image remains without geodata although GPS reception exists. This delay is within the perceived range of less than one second.

That’s because of the camera. All GPS receivers are struggling with this problem. Technical specifications:. Size: 18.5mm x 13mm x 11mm. Weight: 5g. Range: 10 meters. Bluetooth® 2.0 Core Specification.

Operating temperature: -40 ° C to 85 ° C Bluetooth GPS receiver Fortuna Clip-On and Unleashed This geo-tagger is not done with the purchase of the camera-side receiver. You also need a GPS receiver that sends the received satellite data via Bluetooth. I used a Fortuna Clip-on GPS Bluetooth mouse. A disadvantage of two independent systems are two separate power sources.

As a user, you now have to monitor both the battery of the camera and the battery of the GPS receiver. The camera is no problem, as usual.

But with the logger, which is usually stored in a bag, that can be problematic. Foolography and gps-camera.eu offer besides the single receiver also sets consisting of Unleashed module and Bluetooth GPS. These sets are already paired and can be used immediately. Connecting Nikon D300, Unleashed and Fortuna Clip-On: foolography unleashed on Nikon D300 Insert the Unleashed into the 10-pin socket of the camera. That’s it with mechanical coupling. If you want, you can attach an additional safety line to the Bluetooth module and connect it to the camera strap. So it is optimally secured against losing.

Although it sits much firmer than the cheap replica (which I slipped out) but sure-is-safe. The coupling of the Bluetooth devices is a bit more involved than with replicas, but this is the Bluetooth specification. And it has another advantage: If later several Bluetooth GPS receiver are in range of reception, the Unleashed always selects “his” GPS.

GPS settings on the D300 The menu item GPS is available in the Nikon D300 GPS hibernation About idle state can be decided whether the light meter is to go as usual after the set time in the idle state (ON) to save power or GPS reception if this idle state should remain disabled (OFF). Meaning makes hibernation in my opinion only if it is a directly connected GPS device which interrupts the GPS reception as soon as the hibernation occurs. The Bluetooth GPS mouse still receives satellite data in this combination even with the camera off. In this case, after a restart (regardless of whether it is from idle state or switched off), only the BT radio connection must be rebuilt. The lengthy GPS fix is ​​eliminated.

Recommended setting: Sleep ON Another menu item is Position. This is only active when the GPS receiver is connected. Latitude, longitude, altitude, compass bearing and UTC (world time) are displayed here. On a compass also foolography gave out. Therefore the bearing field remains empty.

An improvement for the next version? Test round On the test round again the Fortuna Clip-on GPS Bluetooth receiver served as a partner. Again, no track could be recorded. Therefore no Garmin reference track. The quality of the positions should not be used for the quality assessment of the Unleashed. The position accuracy depends only on the GPS receiver. The mode of operation of the indoor function is best recognized by the picture from the underground car park.

The position is indicated near the entrance. The next picture shows again the exit. Here again the current value was used. Conclusion foolography Unleashed The original Bluetooth geotagging module “Made in Germany” beats the cheap replica by far. It’s smaller, not much, but crucial. It sits much tighter and can be additionally secured. The Bluetooth pairing is a bit more involved but safer in later use.

200 euros plus GPS mouse are first a proud price. Whether you want to use a system for direct geotagging, everyone has to know for themselves. If you have decided against retroactive geotagging and an internal Bluetooth solution, the Unleashed is certainly an excellent choice. I like that:. No rework on the computer. No danger to the image data. The entry is made 100% according to the specifications of Nikon.

Deviations between GPS time and camera time are irrelevant. no noticeable additional consumption of electricity. Last known position is saved (indoor function) I do not really like it that much:. In addition, a Bluetooth GPS receiver is needed. Surcharge about 40-75 €.

In addition to monitoring battery of the GPS receiver. No track for additional presentation options. Existing cable releases can not be used Posted on. The Dawntech Geologger for Nikon SLRs combines two geotagging features. Determine position data and shooting direction and save directly in the photo. In addition the practice test. With the di-GPS M3-DC Dawntech offers a Geotagger for Nikon DSLR cameras.

DC stands for Digital Compass and already says that besides the location information from the GPS signal, the is also determined by means of a digital compass. Both information is written by the camera directly into the Exif data of the photos.

In addition, there is a coordinate buffer if at the time of recording no GPS signal is available. In buildings, the last known position is then taken out of the store before entering.

In practice this is perfectly sufficient to determine the place clearly. I received the Geotagger from the company MBK ( gps-camera.eu ) for the test. M3-DC versions The connection cable between GPS module and camera is permanently installed in the Geotagger. Therefore, pay attention to the right plug when buying. The following plug variants are available:. Dawntech M3-DC- S3 ( Geotagging Database ) for 10-pin connection (Nikon D200., D300, D300s, D700, D800, D2X / s, D2H / s, D3, D3x, D3s, D4, Fujifilm S5 Pro).

Dawntech M3-DC- S9 ( Geotagging Database ) for USB connection variant A (Nikon D90). Dawntech M3-DC- S5 ( Geotagging Database ) for USB connection variant B (Nikon D3100, D3200, D5000, D5100, D7000) Otherwise, the three models are identical. The scope of delivery consists of:. Dawntech Geotagger. Neoprene carrying bag.

Clip for the camera strap Mounting M3-DC to the camera Dawntech M3-DC Geotagger The 10-pin connector fits perfectly in the accessory socket of my D300. Nothing stands – that’s how it should be. The cable has a good length. With a small loop over the left wheel misplaced the operation as good as not. If the compass is to be used, the logger must be placed on the hot shoe. Only then is the correct orientation given. Electrically there is no connection.

This is a pure attachment, and alignment matter. If the hot shoe is required or if the internal flash should be unfolded, the logger can also be attached to the camera strap with the attached clip. Of course, the compass will no longer deliver meaningful values.

Operation of the Dawntech Geotagger Dawntech M3-DC Geotagger on the Nikon D300 The M3-DC has a slide switch and a button. The switch toggles between Off, Auto and On. The button is used to start the compass calibration.

I prefer the position one. Although this needs more power but it is always the GPS position available. With the switch position AUTO, the operating state is coupled to the light meter of the camera. The calibration of the compass is slightly different than the previously presented Solmeta models. Horizontal wobble in landscape and portrait position is announced.

Overall, that works properly. And you do not have to do it too often. All operations are listed in a well-written German manual. Results with the M3-DC Geotagger from practice At the position information, there is never anything to complain about in the loggers.

Also with the M3-DC the accuracy is great. Incidentally, a SiRF III GPS chipset is installed. There are more differences in the compass function. Again, the Dawntech convinced me. The viewing direction matched over 90% of the images during the test.

I would particularly like to highlight the best performance so far in portrait format. The rate of the correct direction was indeed below the landscape, but much better than previously tested GPS modules. Photo in portrait orientation Conclusion Dawntech M3-DC Geotagger Perfect fitting with the Dawntech M3-DC For currently 169 euros you get an excellent geotagger of information about the location with coordinate buffer and viewing direction delivers. Operation and processing are very good.

I particularly liked the precision of the compass. With the compact Bluetooth receiver from Aokatec, camera-internal geotagging can be done without cables. Together with a Bluetooth GPS receiver, the module connected to the Nikon D300 for testing.

AK-4N on the Nikon D300 The 10-pin connector connects to the Nikon D200, D300 (s), D700, D2x, D2xs, D2Hs, D3 and D3x cameras as well as the Fuji S5Pro GPS receiver. This makes internal geocoding possible with “right” cameras. Not just like previous tests on camera phones. The solutions offered by Nikon (MC-35 or GP-1) are cable-based and therefore not really handy in use. Especially with the MC-35 adapter cable it quickly turns into a tangle of cables. Aokatec wants to do better here. The connection to the GPS receiver is made using Bluetooth.

The AK-4N module to be connected to the camera is small. 26mm x 18mm x 12mm the manufacturer indicates. The GPS module occupies the accessory socket. These also connect the remote control of the shutter button.

Therefore, the existing remote control cable can not be used together with GPS recording. There is a small jack socket available. For this purpose, however, a new, to Canon cameras (1000D, 500D, 300D, ) compatible trigger cable is needed. Technical specifications:.

Range: 10 meters. Pair time for first: 30 seconds. Time to connect: 3 seconds. Transfer rate: 1 record per second. Average power consumption: 10mA.

Price: about 100 EUR Bluetooth GPS receiver Fortuna Clip-On and AOKA AK-4N With the purchase of the camera-side receiver, but it is not done. You also need a GPS receiver that sends the received satellite data via Bluetooth. Previously, these devices were often used to navigate PDAs from Palm. I still have a Fortuna Clip-on GPS Bluetooth mouse.

I use this for this test. A disadvantage of two independent systems are two separate batteries.

As a user, you now have to monitor both the battery of the camera and the battery of the GPS receiver. That’s not a problem with the camera. But with the logger, which is usually stored in a bag, that can be problematic.

Pairing the triad Nikon D300 GPS display Here I was absolutely positively surprised. GPS mouse placed on the window and turned on.

Insert the BT receiver into the accessory socket. Turn on the camera. After a short wait; significantly shorter than the 30s indicated by the manufacturer, the GPS symbol flashed on the display of the D300. Sign that there is a connection to the GPS but no valid signals are yet to be delivered. The receiver also masters the BT pairing with code (0000) of the Fortuna GPS mouse. A short time later, GPS reception was also present and the display changed to a continuous signal.

GPS settings on the D300 Nikon D300 system menu GPS The submenu GPS is available in the system menu. Nikon D300 GPS hibernation Hibernate mode allows you to select whether the light meter should go to sleep after a certain period of time (ON) to save power or whether it should be disabled when the GPS receiver is connected (OFF). Meaning makes hibernation in my opinion only if it is a directly connected GPS device. The Bluetooth GPS mouse receives here even with the camera off satellite data. In this case, after a restart (regardless of whether it is from idle state or switched off), only the BT radio connection must be rebuilt. The lengthy GPS fix is ​​eliminated. The additional power consumption by the AOKA receiver is low.

Recommended setting: Sleep ON Nikon D300 position Another menu item is Position. This is only active when the GPS receiver is connected. Latitude, longitude, altitude, compass bearing and UTC (world time) are displayed here.

Aokatec has dispensed with a compass despite the defined mounting position on the camera. Therefore the remains empty. An improvement for the next version? Test round This variant had to complete the 13 km test. Even if no recorded track comes out.

You can already see that the card looks a bit “naked”. Since the test candidate does not output a track, I have also decided not to include the Garmin reference track.

Due to the missing track, no presentations are possible, as shown in the geotagging book starting on page 77. The positions on the map should not decide on the quality of the AK-4N. After all, this one is not responsible for GPS quality. He passes only the data to the camera which he gets from the Bluetooth GPS receiver. The position quality depends solely on the quality of the BT mouse used. Practical test during city sightseeing In addition to the standard round I tested the AK-4N extensively during a city tour in Munich.

In the course of this city tour photos were taken, as is usual for a traveler on vacation. Attractions from the outside, visit of churches and museums. At the end of the tour, the disillusionment came. Only about 60% of all images had geo information in the Exif data. Many pictures from churches, but also some outdoor pictures did not contain any data.

Here is a logger clearly in the advantage. Although the track breaks in buildings. By interpolation of the downstream software, it is possible to determine missing positions at least approximately. From my loggers, I know that this always works quite well for churches or museums. The image inside is assigned to a coordinate near the entrance. Not perfect but still better than no position.

As an improvement, the manufacturer should think about saving the last position. This can then be used until a current position is available again. During the city stroll, the receiver also once slid out of the camera jack. Luckily, this happened near the camera bag. The AK-4N then fell back into the bag.

From other users I’ve heard of lost modules while hiking. Why did Nikon thread the accessory jack?

An improvement for the next AK-4N version should include a mounting option for this thread. Or at least one kind of safety line.

Recorded Exif data Of course, the camera can write the supplied GPS information in JPG, TIF and RAW files. The recorded data goes beyond mere position information. Here is an excerpt from an internally georeferenced picture. Read out using GeoSetter. Exif data with GPS information Conclusion AK-4N The enthusiasm of quick and easy coupling quickly gave way to disillusionment.

If there is no GPS signal when recording, you have no chance to install the position later. But the worst thing I felt was that the receiver could easily slip out. You always have a bad feeling. Is he still there? And with new devices, plugs are always tighter. How should that be later?

Also I appreciate the possibilities which a track offers for the presentation of the pictures. This path is missing here. I can only recommend this option of geo-imaging to landscape or nature photographers who have secure GPS reception and do not need tracks. All others are better served with a cheap logger and some rework on the computer. I like that:. No rework on the computer. No danger to the image data.

Mc Hot Software Tangle 1.1.2 For Mac Download

The entry is made 100% according to the specifications of Nikon. Deviations between GPS time and camera time are irrelevant I do not really like it that much:. In addition, a Bluetooth GPS receiver is needed. Surcharge about 40-50 €. In addition to monitoring battery of the GPS receiver.

Danger of losing as there is no possibility of security. Flash correction button difficult to access when the module is plugged in. No track for additional presentation options. If no GPS reception, then no position; no interpolation or storage of the last position.

Existing cable releases can not be used. Update The AK-4N version for the 10-pin Nikon accessory socket is no longer available. There is now a version for the USB socket of the Nikon D90 or D5000. New is the storage of the last position before the demolition of the GPS signal when entering buildings. The AOKA AK-N90 costs about 100 euros. Due to missing camera I can not test this Geotagger myself. The compact GPS receiver GPSport 260 offers itself as a, outdoor GPS and of course for geotagging.

The practical test checks the suitability of the compact GPS receiver. GPS navigation on the bike. For the Holux GPSport 260 should be particularly well suited.

Mc Hot Software Tangle 1.1.2 For Mac

This and the suitability for geotagging clarifies the test. First impression and functionality Holux GPSport 260 In the case of the Holux GPSport 260, a GPS receiver the size of a bar of soap, the first thing that stands out is the poisonous green color that underlines the outdoor character. Underneath the square LCD screen are two buttons and a 5-way directional pad. More controls are not necessary despite the high functionality. The hardware equipment includes a GPS receiver with MTK 3329 chipset, barometer and an electronic 3D compass. The housing is protected against water according to IPX7.

To power a 1050 mAh lithium-ion battery is firmly installed. The test device was provided to me by Holux Germany. At the time of testing, the firmware version 02.02.01 was up to date.

The PC software ezTour Plus was used in version 3.2. Technical data and delivery In the pack next to the GPS receiver are still:. Bicycle mount with cable ties. power adapter. USB cable. tether. Software CD.

Short instruction in German GPS chipset MTK 3329 Memory internally 160,000 track points display compass barometer Bluetooth Waypointtaste battery pack Fixed Battery life 14 to 19 hours depending on the lighting connection Mini USB size 82 x 54 x 22 mm mass 72 grams Display and operation Bicycle mount on the handlebar Before using the bike for the first time, the bike mount must be secured with cable ties. The GPS receiver is then simply pushed onto the holder and locked with the catch. Unfortunately, the attachment lever lacks tension. So the lever must be pulled up to secure the device. A press on this tab and the Holux is released again and can be deducted. The display resolves to 128 x 128 pixels and can display text and graphics in four shades of gray.

Mc Hot Software Tangle 1.1.2 For Mac Pc

The backlight can be switched on permanently or at the touch of a button and ensures a good overview even at dusk. After switching on, you end up in the main menu with eight menu items. Via the directional pad, it goes to the desired menu item and by pressing on this submenu on. While driving, this only works very limited. The pressure points for moving and confirming are too close to each other. The size of the menu is huge and so unfortunately the complexity of the service I feel not particularly intuitive. A map view is not available on the Holux 260.

The current position can be passed on to a smartphone via QR code and should be displayed there on the map. Unfortunately, the website where the position should be shown was not (anymore) available. Geotagging with the Holux GPSport 260 The most important thing for track-based geotagging is the size of the memory. This can absorb 160,000 waypoints on the 260er.

That’s enough for 22 days at a waypoint every 5 seconds for 10 hours of daily recording. Reference image for geotagging To compensate for a time difference between GPS time and camera clock, a reference picture with time is useful. The GPSsport 260 displays the current time in sports mode. With a photo of this view, the time synchronization in GeoSetter is quite easy. In “Settings – Log” various adjustments can be made. The interval between two track points can be set automatically, time-controlled or distance-dependent. With activated autostart, the track recording starts immediately when GPS reception is available.

To save memory and keep the track “clean”, a recording pause can be automatically inserted when the speed drops below a threshold. My settings: Interval – time – 5 seconds Auto Start – On Break – 1 km / h software Included on the CD is a software package consisting of drivers, ezTour Plus and ezTour Planner. The software is only for me to set, read and delete the logger. In the ezTour Planner routes can be planned on a Google map and sent to the GPS device. The latest versions can be downloaded from the Holux support page. Incidentally, the product key is under the flap of the CD case – for anyone who, like me, uses the download version and searches for the key Posted on Posts navigation.